Schneider Electric | XX9V1A1C2M12 | Ultrasonic Proximity

Call Us +65 8693 8729
phone 0
phone 0
Product

Industrial Automation

XX9V1A1C2M12 - Ultrasonic Sensor - Sn=0.5 m - 4...20 mA

  • $586.50

Ultrasonic sensors XX, ultrasonic sensor parallelepipedic, Sn 0.5 m, 4...20 mA, M12 connector

Out Of Stock

This product is out of stock, submit your email and we will update once it restock.

range of product Telemecanique Ultrasonic sensors XX
sensor type Ultrasonic sensor
series name General purpose
sensor name XX9
sensor design Flat form 18 x 33 x 60 + cylindrical M18
detection system Diffuse
[Sn] nominal sensing distance      0.5 m adjustable with remote teach push-button
material Plastic
type of output signal Analogue
wiring technique 4-wire
analogue output function 4...20 mA
[Us] rated supply voltage 12...24 V DC with reverse polarity protection
electrical connection Male connector M12 4 pins
[Sd] sensing range 0.051…0.508 m
beam angle 6 °
IP degree of protection IP67 conforming to IEC 60529
enclosure material Valox
front material Epoxy
thread type M18 x 1
supply voltage limits 10…28 V DC
[Sa] assured operating distance 0.051…0.508 m (teach mode)
blind zone 0…51 mm
transmission frequency 300 kHz
repeat accuracy 1.27 %
deviation angle from 90° of object to be detected      -7…7 °
minimum size of detected object Cylinder diameter 2.5 mm at 0.15 m
Flat bar 1 mm wide at 0.15 m
status LED Setting-up assistance: 1 LED (dual colour)
Supply on: 1 LED (green)
Output state: 1 LED (yellow)
current consumption 40 mA
maximum switching capacity 10...500 Ohm overload and short-circuit protection
setting-up Slope selection using teach button
maximum delay first up 100 ms
maximum delay response 15 ms
maximum delay recovery 10 ms
marking CE
threaded length 20 mm
height 65 mm
width 44 mm
depth 18 mm
product weight 0.09 kg