Industrial Automation
XX930A3A1M12 - Ultrasonic Sensor - Sn=8 m
-
$1,182.23
Ultrasonic sensors XX, ultrasonic sensor cylindrical M30, Sn 8 m, M12 connector
Out Of Stock
This product is out of stock, submit your email and we will update once it restock.
range of product | Telemecanique Ultrasonic sensors XX |
---|---|
sensor type | Ultrasonic sensor |
series name | General purpose |
sensor name | XX9 |
sensor design | Cylindrical M30 |
detection system | Diffuse |
[Sn] nominal sensing distance | 8 m adjustable with teach push-button |
material | Plastic |
type of output signal | Analogue |
wiring technique | 4-wire |
analogue output function | 0...10 V |
[Us] rated supply voltage | 15...24 V DC with reverse polarity protection |
electrical connection | Male connector M12 4 pins |
[Sd] sensing range | 0.3…8 m |
beam angle | 16 ° |
IP degree of protection | IP67 conforming to IEC 60529 |
enclosure material | ULTEM |
---|---|
front material | Epoxy |
thread type | M30 x 1.5 |
supply voltage limits | 14…28 V DC |
function available | Without synchronisation mode |
[Sa] assured operating distance | 0.3…8 m (teach mode) |
blind zone | 0…300 mm |
transmission frequency | 75 kHz |
repeat accuracy | 2.54 % |
deviation angle from 90° of object to be detected | -5…5 ° |
minimum size of detected object | Cylinder diameter 50.68 mm at 4.732 m |
status LED | Setting-up assistance: 1 LED (dual colour) Supply on: 1 LED (green) Output state: 1 LED (yellow) |
current consumption | 60 mA |
maximum switching capacity | >= 1 kOhm overload and short-circuit protection |
setting-up | Slope selection using teach button |
maximum delay first up | 1200 ms |
maximum delay response | 250 ms |
maximum delay recovery | 250 ms |
marking | CE |
threaded length | 64.3 mm |
height | 44 mm |
width | 44 mm |
depth | 118 mm |
product weight | 0.115 kg |