Schneider Electric | XS8C4A4PCP20 | Inductive Proximity

Call Us +65 8693 8729
phone 0
phone 0
Product

Industrial Automation

XS8C4A4PCP20 - Inductive - Sn=40mm - NO + NC

  • $147.00

Inductive proximity sensors XS, inductive sensor XS8 40x40x117, PBT, Sn40 mm, 12...48 VDC, terminals

Out Of Stock

This product is out of stock, submit your email and we will update once it restock.

range of product Telemecanique Inductive proximity sensors XS
series name General purpose
sensor type Inductive proximity sensor
device application Mobile equipment
sensor name XS8
sensor design Form 40 x 40 x 117
size 117 mm
body type Fixed
detector flush mounting acceptance      Non-flush mountable
material Plastic
enclosure material PBT
type of output signal Discrete
wiring technique 4-wire
[Sn] nominal sensing distance 40 mm
discrete output function 1 NO + 1 NC
output circuit type DC
discrete output type PNP
electrical connection Screw-clamp terminals, 4 x 1.5 mm²
[Us] rated supply voltage 12...48 V DC with reverse polarity protection
switching capacity in mA <= 200 mA with overload and short-circuit protection
IP degree of protection IP67 conforming to IEC 60529
IP65 conforming to IEC 60529
IP69K conforming to DIN 40050
safety level SIL 2 conforming to EN/IEC 61508
PL = d conforming to EN/ISO 13849-1
SILCL 2 conforming to IEC 62061
safety reliability data MTTFd = 1546 years
PFHd = 7.4E-8 1/h
SFF = 92 %
DC = 75 % with appropriate safety controller
detection face 5 positions turret head
front material PBT
operating zone 0…32 mm
differential travel 3...15% of Sr
repeat accuracy <= 3% of Sr
cable entry number 1 tapped entry for M20 x 1.5 cable gland
status LED Supply on: 1 LED (green)
Output state: 1 LED (yellow)
supply voltage limits 10…58 V DC
switching frequency <= 200 Hz
maximum voltage drop <2 V (closed)
current consumption 0...15 mA no-load
maximum delay first up 7.5 ms
maximum delay response      1.4 ms
maximum delay recovery 2.5 ms
marking CE
height 40 mm
length 40 mm
width 117 mm
net weight 0.244 kg