Industrial Automation
XMLR016G1P25 - Pressure Transmitter - 16 Bar
-
$662.41
Electronic pressure sensors, Pressure sensors XM, XMLR 16 bar, G 1/4, 24 VDC, 4...20 mA, PNP, M12
Out Of Stock
This product is out of stock, submit your email and we will update once it restock.
| range of product | OsiSense XM |
|---|---|
| product or component type | Electronic pressure sensors |
| pressure sensor type | Pressure transmitter |
| pressure switch type of operation | Pressure transmitter with 1 switching output |
| device short name | XMLR |
| pressure rating | 1599.58 kPa 16 bar |
| maximum permissible accidental pressure | 6205.28 kPa 62 bar 6.2 MPa |
| destruction pressure | 6205.28 kPa 62 bar 6.2 MPa |
| controlled fluid | Fresh water (0…80 °C) Air (-20…80 °C) Hydraulic oil (-20…80 °C) Refrigeration fluid (-20…80 °C) |
| fluid connection type | G 1/4 (female) conforming to DIN 3852-Y |
| [Us] rated supply voltage | 24 V DC SELV (voltage limits: 17…33 V) |
| current consumption | <= 50 mA |
|---|---|
| electrical connection | Male connector M12, 4 pins |
| analogue output function | 4...20 mA |
| type of output signal | Analogue + discrete |
| analogue output function | 4...20 mA |
| discrete output type | Solid-state PNP, NO/NC programmable |
| maximum switching current | 250 mA |
| contacts type and composition | NO/NC programmable |
| scale type | Fixed differential |
| maximum voltage drop | 2 V |
| adjustable range of switching point on rising pressure | 128.24…1599.58 kPa 1.28…16 bar 0.128…1.6 MPa |
| adjustable range of switching point on falling pressure | 79.98…1551.32 kPa 0.08…1.55 MPa 0.8…15.5 bar |
| minimum differential travel | 48 kPa 48.26 kPa 0.48 bar |
| materials in contact with fluid | Fluorocarbon FKM (Viton) Ceramic 316L stainless steel |
| front material | Polyester |
| housing material | 316L stainless steel Polyacrylamide |
| operating position | Any position, but disposals can falsify the measurement in case of upside-down mounting |
| protection type | Short-circuit protection Overload protection Overvoltage protection Reverse polarity |
| response time on output | <= 10 ms for analog output <= 5 ms for discrete output |
| switching output time delay | 0...50 s in steps of 1 second |
| display type | 4 digits 7 segments |
| local signalling | 1 LED (yellow) for light ON when switch is actuated |
| display response time type | Fast 50 ms Normal 200 ms Slow 600 ms |
| maximum delay first up | 300 ms |
| overall accuracy | <= 1 % of the measuring range |
| linearity error on analogue output | <= 0.5 % of the measuring range |
| hysteresis on analogue output | <= 0.2 % of the measuring range |
| measurement accuracy on switching output | <= 0.6 % of the measuring range |
| repeat accuracy | <= 0.2 % of the measuring range |
| drift of the sensitivity | +/- 0.03 % of measuring range/°C |
| drift of the zero point | +/- 0.1 % of measuring range/°C |
| display accuracy | <= 1 % of the measuring range |
| mechanical durability | 10000000 cycles |
| depth | 42 mm |
| height | 93 mm |
| width | 41 mm |
| net weight | 0.19 kg |
| [Uimp] rated impulse withstand voltage | 0.5 kV DC |
| electromagnetic compatibility | Susceptibility to electromagnetic fields: 10 V/m 80...2000 MHz conforming to EN/IEC 61000-4-3 Immunity to conducted RF disturbances: 10 V 0.15...80 MHz conforming to EN/IEC 61000-4-6 Surge immunity test: 1 kV conforming to EN/IEC 61000-4-5 Electrical fast transient/burst immunity test: 2 kV conforming to EN/IEC 61000-4-4 Electrostatic discharge immunity test: 8 kV air, 4 kV contact conforming to EN/IEC 61000-4-2 |
