Industrial Automation
XMLB010A2S11 - Adjustable Pressure - 10 Bar
-
$266.56
pressure switch XMLB 10 bar - adjustable scale 2 thresholds - 1 C/O
Out Of Stock
This product is out of stock, submit your email and we will update once it restock.
range of product | Telemecanique Pressure sensors XM |
---|---|
product or component type | Electromechanical pressure sensor |
pressure sensor type | Electromechanical pressure sensor |
device short name | XMLB |
pressure rating | 10 bar |
controlled fluid | Air (0…70 °C) Fresh water (0…70 °C) Hydraulic oil (0…70 °C) |
fluid connection type | G 1/4 (female) conforming to ISO 228 |
electrical connection | Screw-clamps terminals, 1 x 0.5...2 x 2.5 mm² 1 connector Pg 13 |
AWG gauge | AWG 20...AWG 14 |
cable entry | Cable gland 9…13 mm |
contacts type and composition | 1 C/O |
product specific application | - |
pressure switch type of operation | Regulation between 2 thresholds |
electrical circuit type | Control circuit |
scale type | Adjustable differential |
local display | With |
adjustable range of switching point on rising pressure | 0.7…10 bar |
adjustable range of switching point on falling pressure | 0.13…9.15 bar |
possible differential maximum at high setting | 7.5 bar |
maximum permissible accidental pressure | 22.5 bar |
destruction pressure | 45 bar |
pressure actuator | Diaphragm |
materials in contact with fluid | Zinc alloy FPM, FKM |
enclosure material | Zinc alloy |
[In] rated current | 3 A, B300, AC-15 (Ue = 120 V) conforming to EN/IEC 60947-5-1 1.5 A, B300, AC-15 (Ue = 240 V) conforming to EN/IEC 60947-5-1 0.1 A, R300, DC-13 (Ue = 250 V) conforming to EN/IEC 60947-5-1 |
possible differential minimum at low setting | 0.57 bar (+/- 0.05 bar) |
---|---|
possible differential minimum at high setting | 0.85 bar (- 0.1 bar, + 0.15 bar) |
maximum permissible pressure - per cycle | 12.5 bar |
terminal block type | 4 terminals |
maximum operating rate | 120 cyc/mn |
repeat accuracy | 2 % |
[Ui] rated insulation voltage | 300 V conforming to UL 508 500 V conforming to EN/IEC 60947-1 300 V conforming to CSA C22.2 No 14 |
[Uimp] rated impulse withstand voltage | 6 kV conforming to EN/IEC 60947-1 |
auxiliary contacts operation | Snap action |
contacts material | Silver contacts |
maximum resistance across terminals | 25 mOhm conforming to IEC 255-7 category 3 25 mOhm conforming to NF C 93-050 method A |
short-circuit protection | 10 A cartridge fuse, type gG (gl) |
mechanical durability | 5000000 cycles |
setting | External |
height | 113 mm |
depth | 75 mm |
width | 35 mm |
product weight | 0.705 kg |