Schneider Electric | XCSE5311 | Safety Switch

Call Us +65 8693 8729
phone 0
phone 0
Product

Industrial Automation

XCSE5311 - Soleniod - 1 NC + 2 NO - 24 V AC/DC

  • $733.00

Safety switch, Telemecanique Safety switches XCS, metal XCSE, 1NC+2 NO, slow break, 2 entries tapped Pg 13, 24 V

Out Of Stock

This product is out of stock, submit your email and we will update once it restock.

range of product Telemecanique Safety switches XCS
product or component type Safety switch
component name XCSE
design Rectangular
material Metal
head type Key operated turret head
contacts type and composition 1 NC + 2 NO
contact operation Slow-break, break before make
solenoid contacts type and composition      1 NC + 1 NO (slow-break, simultaneous)
cable entry 2 entries tapped for Pg 13.5
electromagnet interlocking Locking on de-energisation and unlocking on energisation of solenoid
[Us] solenoid supply voltage      24 V - 20...10 %
cable outer diameter 9…12 mm
electrical connection Terminal, clamping capacity: 1 x 0.5...2 x 1.5 mm² with or without cable end
number of poles 3
locking options description With interlocking, locking by solenoid
local signalling 2 LEDs (green or orange) for guard open/guard closed and locked
signalling circuit voltage 24/48 V (voltage limits: 20...52 V)
positive opening With NC contact
supply voltage type AC/DC
supply frequency 50/60 Hz
load factor 1
power consumption in VA 10 VA inrush
10 VA sealed
signalling circuit type AC/DC
signalling circuit consumption 7 mA
mechanical durability 1000000 cycles
minimum actuation speed 0.01 m/s
maximum actuation speed 0.5 m/s
[Ie] rated operational current 0.55 A at 125 V, DC-13, Q300 conforming to EN/IEC 60947-5-1
0.27 A at 250 V, DC-13, Q300 conforming to EN/IEC 60947-5-1
3 A at 120 V, AC-15, B300 conforming to EN/IEC 60947-5-1
1.5 A at 240 V, AC-15, B300 conforming to EN/IEC 60947-5-1
[Ithe] conventional enclosed thermal current      6 A
[Ui] rated insulation voltage 50 V conforming to EN/IEC 60947-1 for signalling circuit
[Uimp] rated impulse withstand voltage 6 kV conforming to EN/IEC 60947-5-1
protection type Overvoltage protection for signalling circuit
short-circuit protection 10 A cartridge fuse type gG (gl)
actuator forcible withdrawal rtc 2000 N
minimum actuator force for extraction 20 N
maximum operating rate 10 cyc/mn for maximum durability
safety level Can reach category 4 with the appropriate monitoring system and correctly wired conforming to EN/ISO 13849-1
Can reach PL = e with the appropriate monitoring system and correctly wired conforming to EN/ISO 13849-1
Can reach SIL 3 with the appropriate monitoring system and correctly wired conforming to EN/IEC 61508
safety reliability data B10d = 5000000 value given for a life time of 20 years limited by mechanical or contact wear
body material Zamak
head material Zamak
depth 44 mm
height 146 mm
width 98 mm
net weight 1.14 kg