Industrial Automation
XALD222 - Control Station - 1NO + 1NC
-
$55.86
Harmony XALD, XALK, Control station, plastic, dark grey lid, 2 flush push buttons Ø22, marked UP ARROW DOWN ARROW, 2 NO
Out Of Stock
This product is out of stock, submit your email and we will update once it restock.
| range of product | Harmony XALD |
|---|---|
| product or component type | Complete control station |
| device short name | XALD |
| product destination | For XB5 Ø 22 mm control and signalling units |
| control station application | Two functions |
| colour of base of enclosure | Light grey (RAL 7035) |
| colour of cover | Dark grey (RAL 7016) |
| material | Polycarbonate |
| operator profile | 2 flush push-buttons |
| operators description | White ''up arrow'' 1 NO - black ''down arrow'' 1 NO |
| control station composition | 1 flush push-button, black 1 NO, white down arrow marking 1 flush push-button, white 1 NO, black up arrow marking |
| marking location | Marking on push-button |
| contact operation | Slow-break |
| cable entry | 2 knock-outs for cable entry, clamping capacity: 14 mm 2 knock-outs for Pg 13 cable gland and ISO M20, clamping capacity: 12 mm |
|---|---|
| product weight | 0.233 kg |
| resistance to high pressure washer | 7000000 Pa at 55 °C, distance : 0.1 m |
| colour of marking | White marking when green, red or black caps Black marking when white caps |
| positive opening | Without |
| operating travel | 2.6 mm (NO changing electrical state) 4.3 mm (total travel) |
| operating force | 3.8 N NO changing electrical state |
| mechanical durability | 10000000 cycles |
| connections - terminals | Screw clamp terminals, <= 2 x 1.5 mm² with cable end conforming to EN/IEC 60947-1 Screw clamp terminals, >= 1 x 0.22 mm² without cable end conforming to EN/IEC 60947-1 |
| tightening torque | 0.8…1.2 N.m conforming to EN/IEC 60947-1 |
| shape of screw head | Cross compatible with Philips no 1 screwdriver Cross compatible with pozidriv No 1 screwdriver Slotted compatible with flat Ø 4 mm screwdriver Slotted compatible with flat Ø 5.5 mm screwdriver |
| contacts material | Silver alloy (Ag/Ni) |
| short-circuit protection | 10 A cartridge fuse type gG conforming to EN/IEC 60947-5-1 |
| [Ith] conventional free air thermal current | 10 A conforming to EN/IEC 60947-5-1 |
| [Ui] rated insulation voltage | 600 V (pollution degree 3) conforming to EN/IEC 60947-1 |
| [Uimp] rated impulse withstand voltage | 6 kV conforming to EN/IEC 60947-1 |
| [Ie] rated operational current | 6 A at 120 V, AC-15, A600 conforming to EN/IEC 60947-5-1 3 A at 240 V, AC-15, A600 conforming to EN/IEC 60947-5-1 1.2 A at 600 V, AC-15, A600 conforming to EN/IEC 60947-5-1 0.55 A at 125 V, DC-13, Q600 conforming to EN/IEC 60947-5-1 0.27 A at 250 V, DC-13, Q600 conforming to EN/IEC 60947-5-1 0.1 A at 600 V, DC-13, Q600 conforming to EN/IEC 60947-5-1 |
| electrical durability | 1000000 cycles, AC-15, 2 A at 230 V, operating rate <3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C 1000000 cycles, AC-15, 3 A at 120 V, operating rate <3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C 1000000 cycles, AC-15, 4 A at 24 V, operating rate <3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C 1000000 cycles, DC-13, 0.2 A at 110 V, operating rate <3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C 1000000 cycles, DC-13, 0.5 A at 24 V, operating rate <3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C |
| electrical reliability | Λ < 10exp(-6) at 5 V and 1 mA conforming to EN/IEC 60947-5-4 Λ < 10exp(-8) at 17 V and 5 mA conforming to EN/IEC 60947-5-4 |
