Industrial Automation
XACA871 -Pendant Station - Single Speed - 8 Button
-
$389.03
Harmony XAC, Pendant control station, plastic, yellow, 8 push buttons, 1 to 7 with 1 NO, 8th with 1 NC
Out Of Stock
This product is out of stock, submit your email and we will update once it restock.
| range of product | Harmony XAC |
|---|---|
| product or component type | Pendant control station |
| device short name | XACA |
| control station type | Double insulated |
|---|---|
| enclosure material | Polypropylene |
| electrical circuit type | Control circuit |
| Enclosure type | Complete ready for use |
| control station application | Control of single speed hoist motor |
| control station composition | 8 push-buttons |
| control button type | First push-button 1 NO raise, slow Second push-button 1 NO lower, slow Fourth push-button 1 NO left, slow Third push-button 1 NO right, slow Fifth push-button 1 NO forward slow Sixth push-button 1 NO reverse, slow Eighth push-button 1 NC O Seventh push-button 1 NO I |
| product compatibility | ZB2BE101 for each direction (except eighth) ZB2BE102 for eighth direction |
| mechanical interlocking | With mechanical interlocking between pairs |
| control station colour | Yellow |
| connections - terminals | Screw clamp terminals, 1 x 0.5...1 x 2.5 mm² without cable end Screw clamp terminals, 1 x 0.5...2 x 1.5 mm² with cable end |
| standards | EN/IEC 60947-5-1 CSA C22.2 No 14 EN/IEC 60204-32 UL 508 |
| product certifications | CCC GOST |
| protective treatment | TH |
| ambient air temperature for operation | -25…70 °C |
| ambient air temperature for storage | -40…70 °C |
| vibration resistance | 15 gn (f= 10…500 Hz) conforming to IEC 60068-2-6 |
| shock resistance | 100 gn conforming to IEC 60068-2-27 |
| overvoltage category | Class II conforming to IEC 61140 |
| IP degree of protection | IP65 conforming to IEC 60529 |
| IK degree of protection | IK08 conforming to EN 50102 |
| mechanical durability | 1000000 cycles |
| cable entry | Rubber sleeve with stepped entry 8…26 mm |
| contact code designation | A600 AC-15, Ue = 240 V, Ie = 3 A conforming to IEC 60947-5-1 appendix A A600 AC-15, Ue = 600 V, Ie = 1.2 A conforming to IEC 60947-5-1 appendix A Q600 DC-13, Ue = 250 V, Ie = 0.27 A conforming to IEC 60947-5-1 appendix A Q600 DC-13, Ue = 600 V, Ie = 0.1 A conforming to IEC 60947-5-1 appendix A |
| [Ithe] conventional enclosed thermal current | 10 A |
| [Ui] rated insulation voltage | 600 V (pollution degree 3) |
| [Uimp] rated impulse withstand voltage | 6 kV conforming to IEC 60947-1 |
| contact operation | Slow-break |
| maximum resistance across terminals | 25 MOhm |
| operating force | 10 N push-button 8 N eighth push-button |
| short-circuit protection | 10 A fuse protection by cartridge fuse type gG |
| rated operational power in W | 40 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 120 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C 48 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 48 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C 65 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 24 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C |
| terminals description ISO n°1 | (13-14)NO |
| terminals description ISO n°2 | (11-12)NC |
| terminal identifier | (11-12)NC (13-14)NO |
| product weight | 0.94 kg |
