Industrial Automation
TM241CE40T - PLC - 40 I/O - PNP - 24VDC
-
$1,584.00
Logic controller, Modicon M241, 40 IO transistor PNP Ethernet
Out Of Stock
This product is out of stock, submit your email and we will update once it restock.
| range of product | Modicon M241 |
|---|---|
| product or component type | Logic controller |
| [Us] rated supply voltage | 24 V DC |
| discrete input number | 24, discrete input 8 fast input conforming to IEC 61131-2 Type 1 |
| discrete output type | Transistor |
| discrete output number | 16 transistor 4 fast output |
| discrete output voltage | 24 V DC for transistor output |
| discrete output current | 0.1 A for fast output (PTO mode) (Q0...Q3) 0.5 A for transistor output (Q0...Q15) |
| discrete I/O number | 40 |
|---|---|
| maximum number of I/O expansion module | 7 (local I/O-Architecture) 14 (remote I/O-Architecture) |
| supply voltage limits | 20.4…28.8 V |
| inrush current | 50 A |
| power consumption in W | 32.6…40.4 W (with max number of I/O expansion module) |
| discrete input logic | Sink or source |
| discrete input voltage | 24 V |
| discrete input voltage type | DC |
| voltage state 1 guaranteed | >= 15 V for input |
| voltage state 0 guaranteed | <= 5 V for input |
| discrete input current | 10.7 mA for fast input 7 mA for input |
| input impedance | 4.7 kOhm for input 2.81 kOhm for fast input |
| response time | <= 2 µs turn-on, I0...I7 terminal(s) for fast input <= 2 µs turn-off, I0...I7 terminal(s) for fast input <= 2 µs turn-on, Q0...Q3 terminal(s) for fast output <= 2 µs turn-off, Q0...Q3 terminal(s) for fast output 50 µs turn-on, I0...I15 terminal(s) for input 50 µs turn-off, I0...I15 terminal(s) for input <= 34 µs turn-on, Q0...Q15 terminal(s) for output <= 250 µs turn-off, Q0...Q15 terminal(s) for output |
| configurable filtering time | 1 µs for fast input 12 ms for fast input 0 ms for input 1 ms for input 4 ms for input 12 ms for input |
| discrete output logic | Positive logic (source) |
| output voltage limits | 30 V DC |
| maximum current per output common | 2 A |
| maximum output frequency | 20 kHz for fast output (PWM mode) 100 kHz for fast output (PLS mode) 1 kHz for output |
| accuracy | +/- 0.1 % at 0.02…0.1 kHz for fast output +/- 1 % at 0.1…1 kHz for fast output |
| maximum leakage current | 5 µA for output |
| maximum voltage drop | <1 V |
| maximum tungsten load | <2.4 W |
| protection type | Short-circuit protection Short-circuit and overload protection with automatic reset Reverse polarity protection for fast output |
| reset time | 10 ms automatic reset output 12 s automatic reset fast output |
| memory capacity | 8 MB for program 64 MB for system memory RAM |
| data backed up | 128 MB built-in flash memory for backup of user programs |
| data storage equipment | <= 16 GB SD card (optional) |
| battery type | BR2032 lithium non-rechargeable, battery life: 4 year(s) |
| backup time | 2 years at 25 °C |
| execution time for 1 KInstruction | 0.3 ms for event and periodic task 0.7 ms for other instruction |
| application structure | 3 cyclic master tasks + 1 freewheeling task 8 external event tasks 4 cyclic master tasks 8 event tasks |
| realtime clock | With |
| clock drift | <= 60 s/month at 25 °C |
| positioning functions | PTO function 4 channel(s) (positioning frequency: 100 kHz) PTO function 4 channel(s) for transistor output (positioning frequency: 1 kHz) |
| counting input number | 4 fast input (HSC mode) at 200 kHz 16 standard input at 1 kHz |
| control signal type | A/B at 100 kHz for fast input (HSC mode) Pulse/direction at 200 kHz for fast input (HSC mode) Single phase at 200 kHz for fast input (HSC mode) |
| integrated connection type | Non isolated serial link serial 1 with RJ45 connector and RS232/RS485 interface Non isolated serial link serial 2 with removable screw terminal block connector and RS485 interface USB port with mini B USB 2.0 connector Ethernet with RJ45 connector |
| supply | (Serial 1)serial link supply: 5 V, <200 mA |
| transmission rate | 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 15 m for RS485 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 3 m for RS232 480 Mbit/s for bus length of 3 m for USB 10/100 Mbit/s for Ethernet |
| communication port protocol | Non isolated serial link: Modbus master/slave |
| port Ethernet | 10BASE-T/100BASE-TX - 1 port(s) copper cable |
| ethernet services | FDR DHCP server via TM4 Ethernet switch network module DHCP client embedded Ethernet port SMS notifications Updating firmware SNMP client/server Programming NGVL Monitoring IEC VAR ACCESS FTP client/server Downloading SQL client Modbus TCP client I/O scanner Ethernet/IP originator I/O scanner embedded Ethernet port Ethernet/IP target, Modbus TCP server and Modbus TCP slave Send and receive email from the controller based on TCP/UDP library Web server (WebVisu & XWeb system) OPC UA server DNS client |
| local signalling | 1 LED (green) for PWR 1 LED (green) for RUN 1 LED (red) for module error (ERR) 1 LED (red) for I/O error (I/O) 1 LED (green) for SD card access (SD) 1 LED (red) for BAT 1 LED (green) for SL1 1 LED (green) for SL2 1 LED (red) for bus fault on TM4 (TM4) 1 LED per channel (green) for I/O state 1 LED (green) for Ethernet port activity |
| electrical connection | Removable screw terminal blockfor inputs and outputs (pitch 5.08 mm) removable screw terminal blockfor connecting the 24 V DC power supply (pitch 5.08 mm) |
| maximum cable distance between devices | Unshielded cable: <50 m for input Shielded cable: <10 m for fast input Unshielded cable: <50 m for output Shielded cable: <3 m for fast output |
| insulation | Between supply and internal logic at 500 V AC Non-insulated between supply and ground Between input and internal logic at 500 V AC Non-insulated between inputs Between fast input and internal logic at 500 V AC Between output and internal logic at 500 V AC Non-insulated between outputs Between fast output and internal logic at 500 V AC Between output groups at 500 V AC |
| marking | CE |
| surge withstand | 1 kV power lines (DC) common mode conforming to EN/IEC 61000-4-5 1 kV shielded cable common mode conforming to EN/IEC 61000-4-5 0.5 kV power lines (DC) differential mode conforming to EN/IEC 61000-4-5 1 kV relay output differential mode conforming to EN/IEC 61000-4-5 1 kV input common mode conforming to EN/IEC 61000-4-5 1 kV transistor output common mode conforming to EN/IEC 61000-4-5 |
| web services | Web server |
| maximum number of connections | 8 Modbus server 8 SoMachine protocol 10 web server 4 FTP server 16 Ethernet/IP target 8 Modbus client |
| number of slave | 64 Modbus TCP: 16 EtherNet/IP: |
| cycle time | 10 ms 16 EtherNet/IP 64 ms 64 Modbus TCP |
| mounting support | Top hat type TH35-15 rail conforming to IEC 60715 Top hat type TH35-7.5 rail conforming to IEC 60715 plate or panel with fixing kit |
| height | 90 mm |
| depth | 95 mm |
| width | 190 mm |
| product weight | 0.62 kg |
