RM35TM250MW

Call Us +65 8693 8729
phone 0
phone 0
Product

Industrial Automation

RM35TM250MW

  • $266.50

Modular motor voltage and temperature control relay, 5 A , 2NO, 24..240 V AC/DC

Out Of Stock

This product is out of stock, submit your email and we will update once it restock.

range of product Harmony Control Relays
product or component type 3-phase control relay
relay type Motor temperature control relay
product-specific application For 3-phase supply
relay name RM35TM
relay monitored parameters Phase failure detection
Phase sequence
Test/reset button
Motor temperature via PTC probe
Selection (with or without memory)
time delay Fixed 0.3 s
switching capacity in VA 1250 VA
measurement range 208...480 V voltage AC
0...20 Ohm short-circuit detection
contacts type and composition      2 NO
[Uc] control circuit voltage 24...240 V
reset time 10000 ms output
maximum switching voltage 250 V AC
250 V DC
minimum switching current 10 mA at 5 V DC
maximum switching current 5 A AC
5 A DC
supply voltage limits 20.4…264 V AC
20.4…264 V DC
power consumption in VA 0…4 VA at 24...240 V AC
power consumption 0.5 W DC
control circuit frequency 50...60 Hz +/- 10 %
resistance across terminals 602 mOhm
output contacts 2 NO
nominal output current 5 A
measurement voltage limits 176…528 V AC
delay at power-up 500 ms
voltage range 176...528 V
response time > 50 ms (input Y1 (contact Y1-T1) and push-button)
[Uc] control circuit voltage <= 3.6 V of the temperature control circuit (T1-T2 terminals open)
short-circuit current 0.007 A temperature sensing circuit (T1-T2 terminals short-circuited)
maximum resistance 1500 Ohm for temperature sensor at 20 °C
tripping threshold 3100 Ohm +/- 10 % for temperature control circuit
reset threshold 1650 Ohm +/- 10 % for temperature control circuit
marking CE
overvoltage category III conforming to IEC 60664-1
insulation resistance > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5
> 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1
> 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5
> 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1
> 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5
> 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1
[Ui] rated insulation voltage 400 V conforming to IEC 60664-1
supply frequency 50/60 Hz +/- 10 %
operating position Any position without derating
connections - terminals Screw terminals, 1 x 0.5...1 x 4 mm² (AWG 20...AWG 11) solid without cable end
Screw terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable end
Screw terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 12) flexible with cable end
Screw terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16) flexible with cable end
tightening torque 0.6…1 N.m conforming to IEC 60947-1
housing material Self-extinguishing plastic
local signalling LED (green) for power ON
LED (yellow) for the phase of the relay (R2)
LED (yellow) for the temperature of the relay (R1)
mounting support 35 mm symmetrical DIN rail conforming to EN/IEC 60715
electrical durability 10000 cycles
mechanical durability 30000000 cycles
operating rate <= 360 operations/hour full load
utilisation category AC-12 conforming to IEC 60947-5-1
AC-13 conforming to IEC 60947-5-1
AC-14 conforming to IEC 60947-5-1
AC-15 conforming to IEC 60947-5-1
DC-12 conforming to IEC 60947-5-1
DC-13 conforming to IEC 60947-5-1
width 35 mm
net weight 0.13 kg