RM35BA10

Call Us +65 8693 8729
phone 0
phone 0
Product

Industrial Automation

RM35BA10

  • $340.70

Modular 3-phase and 1-phase pump control relay, 5 A, 1 CO, 208...480 V AC

Out Of Stock

This product is out of stock, submit your email and we will update once it restock.

range of product Harmony Control Relays
product or component type Pump control relay
relay type Pump control relays
product-specific application For 3-phase and single-phase pump
relay name RM35BA
relay monitored parameters Overcurrent and undercurrent control
Phase sequence on 3-phase supply
Phase failure on 3-phase supply
time delay type Adjustable 1...60 s, +/- 10 % Ti on energisation
Fixed 0.3 s reset on terminal Y2
Adjustable 0.1...10 s, +/- 10 % Tt on crossing the threshold
switching capacity in VA 1250 VA
minimum switching current 10 mA at 5 V DC
maximum switching current 5 A AC/DC
maximum power consumption in VA      5 VA AC
measurement range 1...10 A AC
utilisation category AC-12 conforming to IEC 60947-5-1
AC-13 conforming to IEC 60947-5-1
AC-14 conforming to IEC 60947-5-1
AC-15 conforming to IEC 60947-5-1
DC-12 conforming to IEC 60947-5-1
DC-13 conforming to IEC 60947-5-1
reset time 2000 ms
maximum switching voltage 250 V AC/DC
[Un] rated nominal voltage 208...480 V AC 3 phases
230 V AC single phase
[Un] rated nominal voltage 208...480 V AC 3 phases
230 V AC 1 phase
supply voltage limits 183…528 V AC
operating voltage tolerance - 15 % + 10 % Un
resistance across terminals 0.01 Ohm at E1-L2 terminals
width 35 mm
output contacts 1 C/O
nominal output current 5 A
maximum measuring cycle 140 ms as the true rms value
delay at power-up 0.5 s
hysteresis 5 % of threshold
measurement accuracy +/- 10 % of the full-scale value
repeat accuracy +/- 1 % for input and measurement circuit
+/- 1 % for time delay
measurement error 1 % by volt over the whole range
+/- 0.05 %/°C
response time < 300 ms (in the event of a fault)
overload input current 11 A permanent at 25 °C E1-L2 terminals
50 A non-repetitive < 1 s at 25 °C E1-L2 terminals
marking CE : EMC 89/336/EEC
CE : 73/23/EEC
overvoltage category III conforming to IEC 60664-1
insulation resistance > 500 MOhm at 500 V DC between supply and relay output conforming to 60255-5
> 500 MOhm at 500 V DC between measurement and relay output conforming to 60664-1
> 1 MOhm at 500 V DC between supply and measurement conforming to 60255-5
> 500 MOhm at 500 V DC between supply and relay output conforming to 60664-1
> 500 MOhm at 500 V DC between measurement and relay output conforming to 60255-5
> 1 MOhm at 500 V DC between supply and measurement conforming to 60664-1
[Ui] rated insulation voltage      400 V conforming to IEC 60664-1
supply frequency 50/60 Hz +/- 10 %
operating position Any position
connections - terminals Screw terminals, 1 x 0.5...1 x 4 mm² (AWG 20...AWG 11) solid without cable end
Screw terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable end
Screw terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 12) flexible with cable end
Screw terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16) flexible with cable end
tightening torque 0.6…1 N.m conforming to IEC 60947-1
housing material Self-extinguishing plastic
status LED 1 LED green for power ON
1 LED yellow for fault
1 LED yellow for relay ON
mounting support 35 mm symmetrical DIN rail conforming to EN/IEC 60715
electrical durability 100000 cycles
mechanical durability 30000000 cycles
operating rate <= 360 operations/hour full load