Schneider Electric | NSYCVF85M230PF | Enclosure System

Call Us +65 8693 8729
phone 0
phone 0

Industrial Automation

NSYCVF85M230PF -Ventilation - 230VAC

  • $117.20

ClimaSys forced vent. IP54, 85m3/h, 230V, with outlet grille and filter G2

Out Of Stock

This product is out of stock, submit your email and we will update once it restock.

product nameClimaSys CV
product or component type     Fan
Type of filterStandard
Flow rateFree flow rate with standard filter: 85 m3/h at 50 Hz
Free flow rate with standard filter: 98 m3/h at 60 Hz
[Us] rated supply voltage175...253 V
input voltage230 V 50/60 Hz
Absorbed power15 W 60 Hz
17 W 50 Hz
[In] rated current0.121 A 50 Hz
0.097 A 60 Hz
Noise level < at46…49 dB
bearing typeBall
height170 mm external:
width150 mm external:
depth62 mm external:
cut-out dimensions125 x 125 mm
net weight0.78 kg
materialOutlet grille: injected thermoplastic (ASA PC)
colourOutlet grille: grey (RAL 7035)
ambient air temperature for operation     -20…60 °C
ambient air temperature for storage-40…70 °C
maximum pressure50 Pa flow rate 0 m³/h
connections - terminalsFaston connector
IP degree of protectionIP54
device composition1 axial motor
2 protective grille: on the front and rear surfaces
1 filter: front of axial motor
1 outlet grille: front
1 cut-out template
1 power cord
condition of useFlow rates depends on the work point, see ProClima software
Surrounding environment must be relatively clean
Filter must be cleaned and replaced regularly
Overfrequent filter replacement should be avoided
Outside temperature must be 5 °C lower than inside temperature