Schneider Electric | NSYCVF165M230PF | Enclosure System

Call Us +65 8693 8729
phone 0
phone 0

Industrial Automation

NSYCVF165M230PF - Ventilation - 230 V AC

  • $102.90

ClimaSys forced vent. IP54, 165m3/h, 230V, with outlet grille and filter G2

Out Of Stock

This product is out of stock, submit your email and we will update once it restock.

range ClimaSys
product name ClimaSys CV
product or component type      Fan
Type of filter Standard
Flow rate Free flow rate with standard filter: 165 m3/h at 50 Hz
Free flow rate with standard filter: 193 m3/h at 60 Hz
[Us] rated supply voltage 175...253 V
input voltage 230 V 50/60 Hz
Absorbed power 16.3 W 50 Hz
14.3 W 60 Hz
[In] rated current 0.12 A 50 Hz
0.94 A 60 Hz
Noise level < at 50…51 dB
bearing type Ball
height 268 mm external:
width 248 mm external:
depth 104 mm external:
cut-out dimensions 223 x 223 mm
net weight 1.14 kg
material Outlet grille: injected thermoplastic (ASA PC)
colour Outlet grille: grey (RAL 7035)
ambient air temperature for operation      -20…60 °C
ambient air temperature for storage -40…70 °C
maximum pressure 50 Pa flow rate 0 m³/h
connections - terminals Faston connector
IP degree of protection IP54
device composition 1 axial motor
2 protective grille: on the front and rear surfaces
1 filter: front of axial motor
1 outlet grille: front
1 cut-out template
1 power cord
condition of use Overfrequent filter replacement should be avoided
Filter must be cleaned and replaced regularly
Flow rates depends on the work point, see ProClima software
Outside temperature must be 5 °C lower than inside temperature
The surrounding environment must be relatively clean