Schneider Electric | METSEPM5561 | Power Energy Meter

Call Us +65 8693 8729
phone 0
phone 0

Power Distribution

METSEPM5561 - Power Meter - 4DI/2DO - 52 Alarms - MID

  • $2,227.36

PM5561 Meter, 2 Ethernet, up to 63th H, 1,1M 4DI/2DO, 52 alarms, MID

Out Of Stock

This product is out of stock, submit your email and we will update once it restock.

range PowerLogic
product name PowerLogic PM5000
device short name PM5561
product or component type      Power meter
power quality analysis Up to the 63rd harmonic
metering type Measured neutral current
Calculated ground current
device application Multi-tariff
WAGES metering
Power monitoring
type of measurement Current
Power factor
Active and reactive power
supply voltage 125...250 V DC
100...480 V AC 45...65 Hz
network frequency 60 Hz
50 Hz
[In] rated current 5 A
1 A
type of network 3P
3P + N
1P + N
maximum power consumption in VA      10 VA at 480 V
ride-through time 35 ms 120 V AC typical
129 ms 230 V AC typical
display type Backlit LCD
display resolution 128 x 128 pixels
sampling rate 128 samples/cycle
measurement current 5…10000 mA
analogue input type Voltage (impedance 5 MOhm)
Current (impedance 0.3 mOhm)
measurement voltage 20…400 V AC 45...65 Hz between phase and neutral
20…690 V AC 45...65 Hz between phases
frequency measurement range 45…65 Hz
number of inputs 4 digital
measurement accuracy Apparent power +/- 0.5 %
Frequency +/- 0.05 %
Active energy +/- 0.2 %
Reactive energy +/- 1 %
Active power +/- 0.2 %
Voltage +/- 0.1 %
Power factor +/- 0.005
Current +/- 0.15 °C
accuracy class Class 0.2S active energy conforming to IEC 62053-22
number of outputs 2 digital
information displayed Tariff (8)
communication port protocol Modbus RTU and ASCII at 9.6, 19.2 and 38.4 kbauds even/odd or none - 2 wires, insulation 2500 V
Modbus TCP/IP at 10/100 Mbit/s, insulation 2500 V
Ethernet Modbus TCP/IP daisy chain
communication port support RS485
communication gateway Ethernet/serial
data recording Maintenance logs
Data logs
Alarm logs
Event logs
Min/max of instantaneous values
Time stamping
memory capacity 1.1 MB
web services Alarm notification by e-mail
Diagnostic via predefined web pages
Real-time viewing of data
Ethernet service SNMP-Traps
SNTP client
connections - terminals Voltage circuit: screw terminal block4
Control circuit: screw terminal block2
Current transformer: screw terminal block6
RS485 link: screw terminal block4
Digital input: screw terminal block8
Digital output: screw terminal block4
Ethernet network: RJ45 connector2
mounting mode Flush-mounted
mounting support Framework
standards IEC 60529
EN 50470-1
UL 61010-1
IEC 62053-24
EN 50470-3
IEC 62053-22
IEC 61557-12
ANSI C12.20
product certifications CE conforming to IEC 61010-1
CULus conforming to UL 61010-1
MID conforming to EN 50470-1
MID conforming to EN 50470-3
width 96 mm
depth 72 mm
height 96 mm
net weight 450 g