Industrial Automation
LC1G265KUEN - Contactor - 265A - 100-250VAC/DC
-
$1,423.10
High power contactor, TeSys Giga, 3 pole (3NO), AC-3 <=440V 265A, advanced version, 100…250V wide band AC/DC coil
Out Of Stock
This product is out of stock, submit your email and we will update once it restock.
| range | TeSys |
|---|---|
| range of product | TeSys Giga |
| product or component type | Contactor |
| device short name | LC1G |
| contactor application | Power switching Motor control |
| utilisation category | AC-1 AC-3 AC-3e AC-4 AC-5a AC-5b AC-6a AC-6b AC-8b AC-8a DC-1 DC-3 DC-5 |
| poles description | 3P |
| [Ue] rated operational voltage | <= 1000 V AC 50/60 Hz <= 300 V DC |
| [Ie] rated operational current | 385 A (at <40 °C) at 440 V AC-1 265 A (at <40 °C) at 440 V AC-3 |
| [Uc] control circuit voltage | 200...500 V AC/DC 50/60 Hz |
| colour | Dark grey |
| [Uimp] rated impulse withstand voltage | 8 kV |
|---|---|
| overvoltage category | III |
| rated breaking capacity | 2550 A at 440 V |
| [Icw] rated short-time withstand current | 2.2 kA - 10 s 1.23 kA - 30 s 0.95 kA - 1 min 0.62 kA - 3 min 0.48 kA - 10 min |
| associated fuse rating | 315 A aM at 440 V 250 A aM at 690 V 400 A gL at 690 V |
| average impedance | 0.000144 Ohm |
| [Ui] rated insulation voltage | 1000 V |
| power dissipation per pole | 20 W AC-1 - Ith 385 A 11 W AC-3 - Ith 265 A |
| compatibility code | LC1G |
| pole contact composition | 3 NO |
| auxiliary contact composition | 1 NO + 1 NC |
| network frequency | 50/60 Hz 16.67...400 Hz |
| motor power kW | 75 kW at 230 V AC 50/60 Hz (AC-3e) 132 kW at 400 V AC 50/60 Hz (AC-3e) 132 kW at 415 V AC 50/60 Hz (AC-3e) 160 kW at 440 V AC 50/60 Hz (AC-3e) 160 kW at 500 V AC 50/60 Hz (AC-3e) 200 kW at 690 V AC 50/60 Hz (AC-3e) 160 kW at 1000 V AC 50/60 Hz (AC-3e) 75 kW at 230 V AC 50/60 Hz (AC-3) 132 kW at 400 V AC 50/60 Hz (AC-3) 132 kW at 415 V AC 50/60 Hz (AC-3) 160 kW at 440 V AC 50/60 Hz (AC-3) 160 kW at 500 V AC 50/60 Hz (AC-3) 200 kW at 690 V AC 50/60 Hz (AC-3) 160 kW at 1000 V AC 50/60 Hz (AC-3) 75 kW at 230 V AC 50/60 Hz (AC-4) 132 kW at 400 V AC 50/60 Hz (AC-4) 132 kW at 415 V AC 50/60 Hz (AC-4) 150 kW at 440 V AC 50/60 Hz (AC-4) 160 kW at 500 V AC 50/60 Hz (AC-4) 160 kW at 690 V AC 50/60 Hz (AC-4) 160 kW at 1000 V AC 50/60 Hz (AC-4) |
| motor power hp | 75 hp at 200/208 V 60 Hz 100 hp at 230/240 V 60 Hz 200 hp at 460/480 V 60 Hz 200 hp at 575/600 V 60 Hz |
| control circuit voltage limits | Operational: 0.8...1.1 Uc AC/DC (at 60 °C) Drop-out: 0.1...0.45 Uc AC/DC (at 60 °C) |
| coil technology | Built-in bidirectional peak limiting |
| mechanical durability | 5 M cycles 8 M cycles with sub-assembly substitution |
| inrush power in VA (50/60 Hz, AC) | 530 VA |
| inrush power in W (DC) | 300 W |
| hold-in power consumption in VA (50/60 Hz, AC) | 16.1 VA |
| hold-in power consumption in W (DC) | 9.0 W |
| operating time | 45...60 ms closing 15...45 ms opening |
| maximum operating rate | 300 cyc/h AC-1 500 cyc/h AC-3 500 cyc/h AC-3e 150 cyc/h AC-4 |
| connections - terminals | Power circuit: bar 2 - busbar cross section: 32 x 10 mm Power circuit: lugs-ring terminals 1 185 mm² Power circuit: bolted connection Control circuit: push-in 1 0.2…2.5 mm² - cable stiffness: solid stranded without cable end Control circuit: push-in 1 0.25…2.5 mm² - cable stiffness: flexible with cable end Control circuit: push-in 2 0.5…1.0 mm² with cable end Control circuit: push-in 0.75…2.5 mm² - cable stiffness: solid stranded without cable end Control circuit: push-in 0.75…2.5 mm² - cable stiffness: flexible with cable end |
| connection pitch | 45 mm |
| mounting support | Plate |
| standards | EN/IEC 60947-4-1 EN/IEC 60947-5-1 UL 60947-4-1 CSA C22.2 No 60947-4-1 JIS C8201-4-1 JIS C8201-5-1 |
| product certifications | CB Scheme CCC cULus EAC CE UKCA EU-RO-MR by DNV-GL |
| tightening torque | 35 N.m |
| height | 290 mm |
| width | 140 mm |
| depth | 225 mm |
| net weight | 8.2 kg |
