Schneider Electric | ABLS1A24050 | Regulated Power Supply

Call Us +65 8693 8729
phone 0
phone 0
Product

Power Supplies and Transformer

ABLS1A24050 - Regulated Power Supply - 24V - 5A

  • $179.90

Regulated Power Supply, 100-240V AC, 24V 5 A, single phase, Optimized

Out Of Stock

This product is out of stock, submit your email and we will update once it restock.

range of productModicon Power Supply
product or component typePower supply
power supply typeRegulated switch mode
variant optionOptimized
enclosure materialAluminium
Nominal input voltage100...240 V AC single phase
100...240 V AC 2 phases
140...340 V DC
input voltage limits85...264 V AC
120...375 V DC
rated power in W120 W
output voltage24 V DC
power supply output current     5 A
Nominal network frequency50…60 Hz
Network system compatibilityTN
TT
IT
maximum leakage current1 mA 240 V AC
input protection typeIntegrated fuse (not interchangeable) 4 A
External protection (recommended) 20 A Curve C
External protection (recommended) 13 A Curve C
inrush current30.0 A at 115 V
60.0 A at 230 V
power factor0.55 at 115 V AC
0.45 at 230 V AC
efficiency85 % at 115 V AC
88 % at 230 V AC
Output voltage adjustment22...28 V
power dissipation in W25 W
current consumption< 2.5 A 115 V AC
< 1.4 A 230 V AC
< 1.3 A 140 V DC
Turn-on time< 1 s
holding time> 20 ms 115 V AC
> 40 ms 230 V AC
Startup with capacitive loads8000 µF
residual ripple< 120 mV
Expected capacitor lifetime10 year(s)
meantime between failure [MTBF]     700000 h at 25 °C, full load conforming to SR 332
output protection typeAgainst overload and short-circuits, protection technology: automatic reset
Against over temperature, protection technology: manual reset
Against overvoltage, protection technology: manual reset
connections - terminalsScrew connection: 0.5...4 mm², (AWG 20...AWG 12) without wire end ferrule for output
Screw connection: 0.5...2.5 mm², (AWG 20...AWG 14) with wire end ferrule for output
Screw connection: 0.75...4 mm², (AWG 18...AWG 12) without wire end ferrule for input
Screw connection: 0.75...4 mm², (AWG 18...AWG 12) with wire end ferrule for input
line and load regulation< 0.5 %line
< 1 %load
status LED1 LED (green)output voltage
depth117.6 mm
height123.6 mm
width40 mm
net weight0.55 kg
output couplingParallel
Serial
mounting supportTop hat type TH35-15 rail conforming to IEC 60715
Top hat type TH35-7.5 rail conforming to IEC 60715
Double-profile DIN rail
supplySELV conforming to EN/IEC 60950-1
SELV conforming to EN/IEC 60204-1
SELV conforming to IEC 60364-4-41