ATV212HD75N4

Call Us +65 8693 8729
phone 0
phone 0
Product

Industrial Automation

ATV212HD75N4

  • $6,562.00

Variable speed drive, ATV212, 75kW, 480V, EMC, IP21

Out Of Stock

This product is out of stock, submit your email and we will update once it restock.

range of product Altivar 212
product or component type Variable speed drive
device short name ATV212
product destination Asynchronous motors
product-specific application      Pumps and fans in HVAC
assembly style With heat sink
network number of phases 3 phases
motor power kW 75 kW
motor power hp 100 hp
[Us] rated supply voltage 380...480 V - 15...10 %
supply voltage limits 323…528 V
supply frequency 50...60 Hz - 5...5 %
EMC filter Class C2 EMC filter integrated
line current 141.8 A at 380 V
111.3 A at 480 V
apparent power 105.3 kVA at 380 V
prospective line Isc 22 kA
continuous output current 160 A at 380 V
160 A at 460 V
maximum transient current 176 A for 60 s
speed drive output frequency 0.5…200 Hz
nominal switching frequency 8 kHz
switching frequency 6...16 kHz adjustable
8...16 kHz with a derating factor
speed range 1…10
speed accuracy +/- 10 % of nominal slip 0.2 Tn to Tn
torque accuracy +/- 15 %
transient over-torque 120 % of nominal motor torque +/- 10 % for 60 s
asynchronous motor control profile Voltage/frequency ratio, 5 points
Voltage/frequency ratio - Energy Saving, quadratic U/f
Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo)
Voltage/frequency ratio, 2 points
Flux vector control without sensor, standard
regulation loop Adjustable PI regulator
motor slip compensation Not available in voltage/frequency ratio motor control
Automatic whatever the load
Adjustable
local signalling 1 LED (red) for DC bus energized
output voltage <= power supply voltage
isolation Electrical between power and control
type of cable Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 90 °C / XLPE/EPR
Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 70 °C / PVC
With UL Type 1 kit: 3 wire(s)UL 508 cable at 40 °C, copper 75 °C / PVC
electrical connection VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES: terminal 2.5 mm² / AWG 14
L1/R, L2/S, L3/T: terminal 150 mm² (300 kcmil)
tightening torque 0.6 N.m (VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)
41 N.m, 360 lb.in (L1/R, L2/S, L3/T)
supply Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 A, protection type: overload and short-circuit protection
Internal supply: 24 V DC (21…27 V), <200 A, protection type: overload and short-circuit protection
analogue input number 2
analogue input type VIA switch-configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 10 bits
VIB configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 10 bits
VIB configurable PTC probe: 0...6 probes, impedance: 1500 Ohm
VIA switch-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 10 bits
sampling duration 2 ms +/- 0.5 ms F discrete
2 ms +/- 0.5 ms R discrete
2 ms +/- 0.5 ms RES discrete
3.5 ms +/- 0.5 ms VIA analogue
22 ms +/- 0.5 ms VIB analogue
response time FM 2 ms, tolerance +/- 0.5 ms for analog output(s)
FLA, FLC 7 ms, tolerance +/- 0.5 ms for discrete output(s)
FLB, FLC 7 ms, tolerance +/- 0.5 ms for discrete output(s)
RY, RC 7 ms, tolerance +/- 0.5 ms for discrete output(s)
accuracy +/- 0.6 % (VIA) for a temperature variation 60 °C
+/- 0.6 % (VIB) for a temperature variation 60 °C
+/- 1 % (FM) for a temperature variation 60 °C
linearity error VIA: +/- 0.15 % of maximum value for input
VIB: +/- 0.15 % of maximum value for input
FM: +/- 0.2 % for output
analogue output number 1
analogue output type FM switch-configurable voltage 0...10 V DC, impedance: 7620 Ohm, resolution 10 bits
FM switch-configurable current 0...20 mA, impedance: 970 Ohm, resolution 10 bits
discrete output number 2
discrete output type Configurable relay logic: (FLA, FLC) NO - 100000 cycles
Configurable relay logic: (FLB, FLC) NC - 100000 cycles
Configurable relay logic: (RY, RC) NO - 100000 cycles
minimum switching current 3 mA at 24 V DC for configurable relay logic
maximum switching current 5 A at 250 V AC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R)
5 A at 30 V DC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R)
2 A at 250 V AC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R)
2 A at 30 V DC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R)
discrete input type F programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm
R programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm
RES programmable 24 V DC, with level 1 PLC, impedance: 4700 Ohm
discrete input logic Positive logic (source) (F, R, RES), <= 5 V (state 0), >= 11 V (state 1)
Negative logic (sink) (F, R, RES), >= 16 V (state 0), <= 10 V (state 1)
acceleration and deceleration ramps Automatically based on the load
Linear adjustable separately from 0.01 to 3200 s
braking to standstill By DC injection
protection type Overheating protection: drive
Thermal power stage: drive
Short-circuit between motor phases: drive
Input phase breaks: drive
Overcurrent between output phases and earth: drive
Overvoltages on the DC bus: drive
Break on the control circuit: drive
Against exceeding limit speed: drive
Line supply overvoltage and undervoltage: drive
Line supply undervoltage: drive
Against input phase loss: drive
Thermal protection: motor
Motor phase break: motor
With PTC probes: motor
dielectric strength 3535 V DC between earth and power terminals
5092 V DC between control and power terminals
insulation resistance >= 1 mOhm 500 V DC for 1 minute
frequency resolution Display unit: 0.1 Hz
Analog input: 0.024/50 Hz
communication port protocol METASYS N2
Modbus
APOGEE FLN
BACnet
LonWorks
connector type 1 open style
1 RJ45
physical interface 2-wire RS 485
transmission frame RTU
transmission rate 9600 bps or 19200 bps
data format 8 bits, 1 stop, odd-even or no configurable parity
type of polarization No impedance
number of addresses 1…247
communication service Read device identification (43)
Write single register (06)
Time out setting from 0.1 to 100 s
Monitoring inhibitable
Read holding registers (03) 2 words maximum
Write multiple registers (16) 2 words maximum
option card Communication card for LonWorks
operating position Vertical +/- 10 degree
width 320 mm
height 630 mm
depth 290 mm
power dissipation in W 1945 W
airflow 666 m3/h
functionality Mid
specific application HVAC
IP degree of protection IP21
Variable speed drive application selection      Compressor for scroll Building - HVAC
Fan Building - HVAC
Pump Building - HVAC
Motor power range AC-3 55…100 kW at 380…440 V 3 phases
55…100 kW at 480…500 V 3 phases
motor starter type Variable speed drive