Schneider Electric | ATS22D75Q | Soft Starter

Call Us +65 8693 8729
phone 0
phone 0
Product

Industrial Automation

ATS22D75Q - Soft Starter - 75 A

  • $1,968.00

soft starter-ATS22-control 220V-power 230V(18.5kW)/400...440V(37kW)

Out Of Stock

This product is out of stock, submit your email and we will update once it restock.

range of product Altistart 22
product or component type Soft starter
product destination Asynchronous motors
product-specific application      Pumps and fans
component name ATS22
network number of phases 3 phases
[Us] rated supply voltage 230...440 V - 15...10 %
motor power kW 37 kW 400 V
37 kW 440 V
18.5 kW 230 V
factory setting current 69 A
power dissipation in W 63 W for standard applications
utilisation category AC-53A
type of start Start with torque control (current limited to 3.5 In)
IcL starter rating 75 A for connection in the motor supply line for standard applications
IP degree of protection IP20
assembly style With heat sink
function available Internal bypass
supply voltage limits 195…484 V
supply frequency 50...60 Hz - 10...10 %
network frequency 45...66 Hz
device connection In the motor supply line
To the motor delta terminals
[Uc] control circuit voltage 230 V - 15...10 % 50/60 Hz
control circuit consumption 20 W
discrete output number 2
discrete output type Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
minimum switching current 100 mA at 12 V DC (relay outputs)
maximum switching current 5 A 250 V AC resistive 1 relay outputs
5 A 30 V DC resistive 1 relay outputs
2 A 250 V AC inductive 0.4 20 ms relay outputs
2 A 30 V DC inductive 7 ms relay outputs
discrete input number 3
discrete input type (LI1, LI2, LI3) logic, 5 mA 4.3 kOhm
discrete input voltage 24 V <= 30 V
discrete input logic Positive logic LI1, LI2, LI3 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA
output current 0.4...1 Icl adjustable
PTC probe input 750 Ohm
communication port protocol      Modbus
connector type 1 RJ45
communication data link Serial
physical interface RS485 multidrop
transmission rate 4800, 9600 or 19200 bps
installed device 31
protection type Phase failure: line
Thermal protection: motor
Thermal protection: starter
marking CE
type of cooling Forced convection
operating position Vertical +/- 10 degree
height 295 mm
width 145 mm
depth 207 mm
net weight 12 kg
Motor power range AC-3 15…25 kW at 200…240 V 3 phases
30…50 kW at 380…440 V 3 phases
motor starter type Soft starter