ATS01N212QN

Call Us +65 8693 8729
phone 0
phone 0
Product

Industrial Automation

ATS01N212QN

  • $318.80

Soft starter - ATS01 - 12 A - 380..415V - 5.5 KW

Out Of Stock

This product is out of stock, submit your email and we will update once it restock.

range of product Altistart 01
product or component type Soft starter
product destination Asynchronous motors
product-specific application      Simple machine
device short name ATS01
network number of phases 3 phases
[Us] rated supply voltage 380...415 V - 10...10 %
motor power kW 5.5 kW, 3 phases at 380...415 V
IcL starter rating 12 A
utilisation category AC-53B conforming to EN/IEC 60947-4-2
current consumption 60 A at nominal load
type of start Start with a voltage ramp
power dissipation in W 4 W at full load and at end of starting
124 W in transient state
assembly style With heat sink
function available Integrated bypass
supply voltage limits 342…456 V
supply frequency 50...60 Hz - 5...5 %
network frequency 47.5...63 Hz
output voltage <= power supply voltage
[Uc] control circuit voltage Built into the starter
starting time Adjustable from 1 to 10 s
deceleration time Adjustable from 1 to 10 s
starting torque 30...80 % of starting torque of motor connected directly on the line supply
discrete input type Logic (LI1, LI2, BOOST) stop, run and boost on start-up functions <= 8 mA 27 kOhm
discrete input voltage 24...40 V
discrete input logic Positive LI1, LI2, BOOST at State 0: < 5 V and <= 0.2 mA at State 1: > 13 V, >= 0.5 mA
discrete output current 2 A DC-13
3 A AC-15
discrete output type Open collector logic LO1 end of starting signal
Relay outputs R1A, R1C NO
discrete output voltage 24 V (voltage limits: 6...30 V) open collector logic
minimum switching current 10 mA at 6 V DC for relay outputs
maximum switching current      Relay outputs: 2 A at 250 V AC cos phi = 0.5 and L/R = 20 ms inductive load
Relay outputs: 2 A at 30 V DC cos phi = 0.5 and L/R = 20 ms inductive load
display type 1 LED (green) for starter powered up
1 LED (yellow) for nominal voltage reached
tightening torque 1.9…2.5 N.m
0.5 N.m
electrical connection 4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit
Screw connector - rigid 1 0.5...2.5 mm² AWG 14 control circuit
4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit
Screw connector - rigid 2 0.5...1 mm² AWG 17 control circuit
Screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit
4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit
Screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit
4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit
4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit
Screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit
marking CE
operating position Vertical +/- 10 degree
height 124 mm
width 45 mm
depth 131 mm
net weight 0.42 kg
compatibility code ATS01N2
Motor power range AC-3 4…6 kW at 380…440 V 3 phases
motor starter type Soft starter