Industrial Automation
ABLS1A24200 - Regulated Power Supply - 24V - 20A
-
$337.26
Regulated Power Supply, 100-240 V AC, 24V 20 A, single phase
Out Of Stock
This product is out of stock, submit your email and we will update once it restock.
| range of product | Modicon Power Supply |
|---|---|
| product or component type | Power supply |
| power supply type | Regulated switch mode |
| variant option | Optimized |
| enclosure material | Aluminium |
| Nominal input voltage | 100...240 V AC single phase 100...240 V AC 2 phases 140...340 V DC |
| input voltage limits | 85...264 V AC 120...375 V DC |
| rated power in W | 480 W |
| output voltage | 24 V DC |
| power supply output current | 20 A |
| Nominal network frequency | 50…60 Hz |
|---|---|
| Network system compatibility | TN TT IT |
| maximum leakage current | 1 mA 240 V AC |
| input protection type | Integrated fuse (not interchangeable) 10 A External protection (recommended) 20 A Curve C External protection (recommended) 16 A Curve B External protection (recommended) 13 A Curve C |
| inrush current | 45.0 A at 115 V 90.0 A at 230 V |
| power factor | 0.95 at 115 V AC 0.95 at 230 V AC |
| efficiency | 85 % at 115 V AC 88 % at 230 V AC |
| Output voltage adjustment | 22...28 V |
| power dissipation in W | 60 W |
| current consumption | < 5.4 A 115 V AC < 2.7 A 230 V AC < 5 A 140 V DC |
| Turn-on time | < 1.5 s |
| holding time | > 20 ms 115 V AC > 20 ms 230 V AC |
| Startup with capacitive loads | 8000 µF |
| residual ripple | < 120 mV |
| Expected capacitor lifetime | 10 year(s) |
| meantime between failure [MTBF] | 700000 h at 25 °C, full load conforming to SR 332 |
| output protection type | Against overload and short-circuits, protection technology: automatic reset Against over temperature, protection technology: manual reset Against overvoltage, protection technology: manual reset |
| connections - terminals | Screw connection: 0.5...4 mm², (AWG 20...AWG 12) without wire end ferrule for output Screw connection: 0.5...2.5 mm², (AWG 20...AWG 14) with wire end ferrule for output Screw connection: 0.75...4 mm², (AWG 18...AWG 12) without wire end ferrule for input Screw connection: 0.75...4 mm², (AWG 18...AWG 12) with wire end ferrule for input |
| line and load regulation | < 0.5 %line < 1 %load |
| status LED | 1 LED (green)output voltage |
| depth | 128.5 mm |
| height | 123.6 mm |
| width | 85.5 mm |
| net weight | 1.25 kg |
| output coupling | Parallel Serial |
| mounting support | Top hat type TH35-15 rail conforming to IEC 60715 Top hat type TH35-7.5 rail conforming to IEC 60715 Double-profile DIN rail |
| supply | SELV conforming to EN/IEC 60950-1 SELV conforming to EN/IEC 60204-1 SELV conforming to IEC 60364-4-41 |
